loder
  • +91 98422 53226/+91 9842955983
  • littleblockenterprises@gmail.com

Hydraulic Concrete Block Making Machine

It is an egg laying type Hydraulic Concrete Block Making Machine on wheels, which will lay blocks on the concrete floor and move to the next laying. Any type of concrete blocks can be produced with consistent quality by fixing different types of concrete mould and ram into the machine. Our new spares are readily available to replace the wearing parts which are interchangeable.

The model global Concrete Block Making Machine Jumbo 860-g s machine produce 400 x 200 x 100 mm blocks per cycle 16 blocks. This machine is built using simple designs, which make them high on efficiency and low on maintenance. Advanced features and innovative designing makes this model provides quick and easy production. This is a movable hydraulic concrete block making machine on wheels. it will lay blocks on a concrete floor and move to the next position. This process eliminates the need for wood or steel pallets. The mould and ram are moved by hydraulic cylinders, which creates a much stronger block and the block maker can use less cement. Any type of blocks can be produced with consistent quality by affixing the desired mould. This machine applies pressure of 2000 psi. In the machine fitted 2 no’s high frequency vibrator for high compaction and 2 moving motor for easy moving. This machine can be used to produce hollow block, solid blocks, and bricks and interlocking pavers.

| Products | Hydraulic Concrete Block Making Machine

Specifications Single Vibrator System Double Vibrator System Triple Vibrator System
Power (Total) 5 h.p.-3 phase 6.5 h.p.-3 phase 8 h.p.-3 phase
Hydralic pump 3 h.p.-1440 rpm 3 h.p.-1440 rpm 3 h.p.-1440 rpm
Vibrator : Mould 1.5 h.p.-2800 rpm 1.5 h.p.-2800 rpm 3 h.p.*1-2800 rpm
Ram - - 1.5 h.p * 1-2800 rpm
Propulsion 0.5hp-1400 rpm 0.5hp-1400 rpm 0.5hp-1400 rpm
2.Weight (approx.) 900 kgs 950 kgs 1050 kgs
Operating pressure 140 kg/cm^2
Vibrations 6000 Hz Amplitute adjustble
Drive 25 : 1 Worm reduction gear box and chain through front wheel
Moulding area 860 * 600 mm
Max. block height 250 mm
Dimensions 2000 * 1500 * 2000 mm
Capacity 50 to 60 strokes / hour
200 * 200 * 400 mm(8 inch)block -200 to 240 / hour
150 * 200 * 400 mm(6 inch)block -250 to 300 / hour
100 * 200 * 400 mm(4 inch)block -400 to 480 / hour